 |
|
 |
|
|
|
|
These articles not only address filter technology but also report on the findings of different government agencies that have studied water filters. Please take a moment to review the second line of tabs to review this work.
Water goes through a municipal H2O treatment center before it arrives in a resident's home. Although there are many stages to this water treatment process, the H2O itself may still contain many types of contaminants that can affect the taste, color and smell of the water. In order to obtain quality H2O, many residents purchase filters for their homes. Filters give an added assurance that the water arriving in the home will be particle-free and safe for consumption. Filters eliminate the types of toxins that can affect the taste of H2O when it is used for drinking or cooking. The numerous stages of municipal water treatment may be able to reduce the amount of particles and chemicals in the water but are not as effective as systems that also contain water filters.
The first stage of the municipal H2O treatment is the primary treatment. The
water is pumped into storage containers from various sources including rivers
and other initial holding tanks. The H2O is held in pipes and holding tanks
that are made of materials that don't cause water contamination. The H2O is
first taken through a screening process that uses water filters to remove any
large particles that are present in the water. H2O treatment plants also
pre-condition the water if needed. The pre conditioning precipitates any calcium
carbonate which may be present in the water. Some plant may also use a
pre-chlorination process on the incoming water in order to stop any types of
organisms from growing in pipes or storage containers. However, most treatment
plants have discontinued this process because the quality of chlorinated H2O is not as good as regular water. Those households that use water filters on
their tap water, however, have found the chlorine that may have been used by the
H2O plant was easily removed by their effective filter system.
The next treatment the water is moved to is called the secondary treatment. It
focuses on the removal of fine solids, organic and inorganic solids and
microorganisms. The secondary treatment in the municipal H2O treatment process
uses various water filters to remove the particles and sediments that may still
be present in the water. Although the secondary treatment is focused on the
removal of these particles or chemicals, there is still a chance that some
microscopic particles or toxins are still present in the water even after it has
been passed through the treatment. Those residents who are equipped with water
filters have a greater chance of removing all of these dangerous contaminants in
the H2O. The water is left much more fresh and clean than if it was just
passed through the municipal H2O treatment.
The last step in the municipal water treatment process is disinfection of the
water. Chlorine or chlorine dioxide is often used in the disinfection process.
While this chemical does its job at removing the smallest microorganisms and
particles from the H2O, it still leaves the smell and taste of the chlorine.
Added water filters are able to remove the leftover chemicals from the H2O,
leaving it free of toxins and chemicals that may have still been present from
the tertiary process.
Call Us at 800-497-8263 Fax Us at 440-322-0107 info@4waterfiters.com
335 Vassar Avenue : P.O. Box 478
Elyria, Ohio 44036 USA
VirtualCart Secure Socket Layer (SSL) encryption
secures your information.
You do not pay sales tax, we do this for you.
No charge for shipping in the Continental US.
